What is the length of commonly used European standard I-beams and European standard H-beams

The factory length of steel bars is generally 12m; The length of the imported factory is generally 11.8 meters, 12 meters

The factory length of I-beam and H-beam is generally 12m, the factory length of angle steel is generally 6m, and the common length of channel steel is 6m/8m/9m. I-beams are also known as steel beams.

Therefore, it is often used as load-bearing columns and structural columns in steel structure buildings. Due to its strong tensile resistance, HM type I-beams are often used as frame beams in large platforms and large eaves buildings.

Identification method for I-beam specifications:

Usually, we refer to the two sides of the I-beam as its legs, and the middle part is its waist. Therefore, waist height (h) refers to the height of the cross-section of the I-beam, leg width (b) refers to the width of the upper and lower sides of the I-beam, which are the legs, and waist thickness (d) refers to the width (thickness) of the middle part, which is the waist.

That is to say, if the specification parameter of an I-beam is "140 * 80 * 5.5", it means that the waist height of the I-beam of this model is 140mm, the leg width is 80mm, and the waist thickness is 5.5mm.

In addition to using parameters to represent the specifications of European standard I-beams, we can also directly use the model number (IPE/IPN) to represent the waist height. For example, I-beams with a waist height of 120mm can be represented as IPE120, which will make querying faster and more convenient.

The specifications and models of European standard I-beams are as follows:

IPE80 IPE100 IPE120 IPE140 IPE160 IPE180 IPE200 IPE220

IPE240 IPE260 IPE280 IPE300 IPE330 IPE360 IPE400 IPE500

IPE600 IPE700.

European standard H-shaped steel