American standard H-shaped steel

Precautions for operating H-beam equipment:

Manual blank placement and extraction work procedure: Before using the equipment, it is necessary to check whether all connections are secure, installation bolts and nuts are tightened, and sufficient lubricating oil should be added to the left and right chassis before powering on and starting the machine for testing. First, carefully observe the operation of the empty vehicle to see if there is vibration, noise, oil coming from the oil window, and whether the movements of all components are coordinated. Only after everything is normal can the mold be installed. When installing the mold, the power must be cut off, Manually move the motor belt or large gear to rotate the workbench, use American standard H-shaped steel, and raise the sliding seat to a better height. It is better to support an object between the workbench and the bottom surface of the sliding seat to prevent the sliding seat from naturally falling, causing accidents.

H-beam:

1. According to the flange width of the product, it is divided into wide flange, medium flange, and narrow flange H-shaped steel.

2. According to product usage, it is divided into H-shaped steel beams, H-shaped steel columns, H-shaped steel piles, and thick flange H-shaped steel beams.

3. According to production methods, it is divided into welded H-beams and rolled H-beams.

4. Divided into large, medium, and small H-beams according to size specifications.